ASA Multiprime is a synthetic latex based liquid- Technical Data Sheet

DESCRIPTION
Multiprime is a synthetic latex based liquid which can be used for priming a variety
of substrates prior to the use of ASA adhesives and ASA water based waterproofing
membranes. Multiprime will eliminate dust and reduce porosity of plasterboard, fibrous
cement sheeting, cement render, porous concrete and timber fl oors.
FEATURES & BENEFITS
• Reduces porosity
• Makes adhesive application easy
• Stops premature drying of adhesives
• Eliminates dust
• Expands open time

RECOMMENDED FOR
• Porous concrete
• Cement render
• Blockwork
• Brickwork
• Hebel blocks
• Sand/cement screeds
• Fibrous cement sheeting
• Plasterboard
• Timber
• Particleboard
SURFACE PREPARATION
Surfaces must be firm, clean, dry, sound and smooth. All grease, oil, wax, curing compound, dust, plaster
droppings and paint must be removed prior to the application of Multiprime. Building boards, timber and
particleboard flooring must be fixed in accordance to the manufacturer’s directions. Timber and particleboard
fl ooring must be sanded prior to application of Multiprime. Cement render must be allowed to cure for at least 7
days and concrete for at least 28 days.
APPLICATION
Apply Multiprime onto the correctly prepared surface using a brush, roller or sponge. Allow to dry for at least 30
minutes prior to the application of adhesive or waterproofing membrane.
CLEAN UP
Multiprime can be cleaned up using warm water and detergent prior to the product drying.
PACKAGING
20 litre, 5 litre and 1 litre plastic jerry cans.
COVERAGE
Approximately 8m² per litre depending on porosity of substrate.
SAFETY PRECAUTIONS
This product is non-toxic and has no known harmful effects. It is advisable to wear gloves and use good
occupational health and safety practices to avoid personal contact. For more detailed information refer to
product MSDS.
SHELF LIFE
Unopened containers can be stored for up to 12 months in a cool, dry and weatherproof environment
LIMITATIONS
Do not use on non-porous surfaces such as existing tiles, waterproofing membranes or steel trowel finished
floors
Only suitable on porous surfaces

Technical Data Sheet

http://asanzltd.com/pdffiles/Additives/MULTIPRIME.pdf

FREEPHONE: 0508 222 777
FREEFAX: 0508 222500

148 Pavilion Drive
Air Park II
Auckland Airport
Auckland 2022
(off Montgomerie Road)

PO Box 112-119
Penrose, Auckland

telephone: 09 257 3580
facsimile: 09 257 3589

http://www.bostik.com.au

Victorian Head Office
51-71 High Street Thomastown Victoria 3074
Tel: +613 9279 9333 Fax:+613 9279 9270

New South Wales Office
21 Tattersall Road, Kings Park NSW 2148
Tel: +612 8825 3488 Fax: +613 8825 3411

Queensland Office
660 MacArthur Avenue Eagle Farm QLD 4009
Tel: +617 3260 2206 Fax: +617 3260 2123

South Australia Office
23 Pambula Street, Regency Park SA 5010
Tel: +618 8244 0511 Fax: +618 8244 0522

Western Australia Office
12 Thorpe Close Welshpook, WA, 6016
Tel: +618 9258 6218 Fax:+618 9258 7687